z150 Series for Timing & Navigation Applications
 |
 |
|
|
z150
Series for Timing Applications /
Front Panel |
z150 Series for
Timing Applications /
Rear Panel |
|
 |
 |
|
|
z150
Series for Navigation Applications /
Front Panel |
z150
Series for Navigation Applications /
Rear Panel |
|
Four products for fixed and mobile, commercial and
industrial applications
|
||
| » Download z150 Series datasheet |
 |
|
|
Model |
|
Type of application |
|
Output |
|
T100 |
GPS |
Timing |
Static |
1 Port RS232 + 1 Port USB
Freq-out 10Mhz, 1PPS-out |
|
P200 |
GPS |
Position, Velocity, Time |
Static & Mobile |
1 Port RS232
1PPS-out |
|
P300 |
GPS |
Position, Velocity, Time |
Static & Mobile |
1 Port RS232 + 1 Port USB
1PPS-out |
|
P400 |
GPS
GALILEO COMPASS |
Position, Velocity, Time |
Static & Mobile |
1 Port RS232 + 1 Port USB
1PPS-out |
ZTI offers a complete low-cost configurable platform "z150 Series" with a large choice of GPS receivers (TRIMBLE Copernicus II™, Condor+™, ICM-Module™, and NAVIS NV08C-CSM™), ports configuration (RS232, RS422 or USB), multi 1PPS outputs (TTL, LV-TTL, RS232, USB or RS422 levels) and frequencies outputs (10MHz or 40MHz).
Based on latest GPS receivers generation (sensitivity @ -160dBm), the z150 Series fulfills many customers’ applications. Thanks to its robust power supply (9-70Volts AEC-Q100 Automotive grade 1 qualified, powering is also possible directly through DB9 connectors).
GPS RF signal through a FAKRA Blue connector, Industrial extended temperature qualified (-30°C to +85°C) the z150 Series is ideally suited for Embedded/Navigation applications.
z150 Series can be declined also in TIMING versions with dedicated features such as TRAIM and Self-Survey, 10MHz or 40MHz (3.10-8 accuracy) frequency output and 1PPS (15ns accuracy) through rears SMA connectors.
If you are looking for a very accurate 1PPS and/or frequency to synchronize your systems, z150 Series corresponds to your needs, mechanically ready to use in an anodized enclosure, flanges for a robust fixing are supplied on request.
z150 Series is simply the best choice for your commercial or industrial application.
| Part Number | Receiver | GPS | Glonass Galileo Compass |
Port A | Port B | 1PPS RS232 |
1PPS USB |
Freq-out SMA |
1PPS-Out SMA |
TRAIM Self-Survey |
| T100 | ICM-SMT |
 |
RS232 | USB | |
|
LVTTL |
|
||
| P200 | C1919C |
|
RS232 |
|
TTL |
(3) |
||||
| P300 | Copernicus II |
|
RS232 (1) | USB |
|
|
TTL |
|
||
| P400 | NV08C-CSM |
|
|
RS232 | USB |
|
|
10Mhz (2) |
TTL |
(4) |
(1) RS422 on request.
(2) 40Mhz on request.
(3) Not configurable.
(4) Only usable in static mode for timing applications.
| 1PPS | One Pulse Per Second |
| TRAIM | Time-Receiver Autonomous Integrity Monitoring algorithm (on clock and frequency) which automatically detects and rejects faulty satellites from the solution. TRAIM assures high PPS integrity. |
| Self-Survey | The receiver enters automatic Self-Survey mode on power-up during a period of time (10 or 20 minutes depending on the receiver) to ensure accurate reference position for improved timing accuracy. When the self-survey is complete, the receiver outputs PPS with only one satellite being tracked. |
 |
In
option: ZTS-P software for Windows platforms.
ZTS (Zti Time Service) software updates PC clock with a guaranteed accuracy of 1(one) millisecond by using a GNSS receiver on a com port providing 1PPS and NMEA messages. The software includes specialized algorithms developed by ZTI to guaranty the accuracy. |
|
Pin DB9 |
RS-232 |
RS-422 |
|
1 |
Ground |
TX+ |
|
2 |
TX |
TX- |
|
3 |
RX |
RX- |
|
4 |
NC |
RX+ |
|
5 |
Ground |
Ground |
|
6 |
Optional External Power |
Optional External Power |
|
7 |
NC |
NC |
|
8 |
PPS (RS-232 Level) |
PPS+ |
|
9 |
Ground |
PPS- |
Note: PPS is also available through USB connector on CTS signal for models with USB port.
| Other Timing Products... » USB GPS Dongle with PPS » Network Time Servers » Time Units |